I just ordered one, after my stock unit broke. Hopefully I didn't damage my clutch/tranny driving around with the stock bushing borken and not allowing the clutch to fully disengage.
It's complete... You need a 10-24 machine screw.. It looks like it was screwed together from the marks on the cover.. Maybe somebody here picked up the wrong bolt and threw it in the bag.. but from the picture it looks to be the right one..
If you have any problems call us , again..
i am very intrested about this product but customer service comes first. Im pretty weary about Rage Tek not because of their products but wait time. Nemo, i PMed you and need to find out if you have this item in stock. Im driving around with a tbolt holding the rubber bushing for 2 weeks now due to the fact that the rubber stock gromet has broken. I need to know can this thing be shipped if i paypal you the money wednesday. If not dealer here i come. I tried Pming you but no response.
i am very intrested about this product but customer service comes first. Im pretty weary about Rage Tek not because of their products but wait time. Nemo, i PMed you and need to find out if you have this item in stock. Im driving around with a tbolt holding the rubber bushing for 2 weeks now due to the fact that the rubber stock gromet has broken. I need to know can this thing be shipped if i paypal you the money wednesday. If not dealer here i come. I tried Pming you but no response.
Your not going to get a PM back from Nemo as fast as you are from me. Nemo has alot of things going on in the shop with builds and what not and doesnt have the time to come on here and answer PM's. Thats why i am here. I'm always on here to take care of PM's questions etc. Please PM me from now on.
With that being said we do not have any in stock at the moment. There is some in transit to us from the machine shop. Should be getting them monday or tuesday hopefully. I will let you know if we get them in stock before wednesday. So dont pay just yet.
Having product very high in demand and us at the mercy of machine shops to get them done is what takes so long.
I was just wondering if you got these in yet. I ordered one while I was at the shop last Thursday and Nemo said he had some coming. I was just wondering when they were going to ship. Also, how much do you guys charge for a clutch install?
__________________
R.I.P. Joel Halfhide 6-12-1985 to 2-10-2008
You will be missed, but never forgotten.
I am having a problem with my ACT clutch. Its now grabbing right at the end of the travel from the floor. It has 40k on it and I have only slipped it several times. I was pointed in this direction and wanted to know what you guys thought thanks.
__________________
Injen 3" CAI, Weapon R Pressure Pipe W/Turbo XS RFL BOV, hard pipes, Needswing DP with powerplate, 60mm true TB with spacer, AGP Wastegate, Plugs and Wires, EBC, Fuel return line, DC Sports Front Strut Tower Bar, 27mm front sway bar, 22mm rear sway, barWerks 3 point rear strut tower bar, Motor mount inserts.
Soon to be FMIC and Stage ??
Sounds like some other issue.. 40k is good for a metallic clutch. You could buy our pivot and try adjusting the pedal height. But that might not fix your issue.
AutoForums.com is the premier network of enthusiast-owned
enthusiast-operated automotive communities.
We operate more than 100 automotive forums where our users consult peers for shopping information and advice, and share
experiences and opinions as a community.
Linear Mode
