Accelerator Billet Input Shafts Update and Pics!!! - SRT Forums

NemoFoss · 05-01-2008, 05:11 PM

They'll be done next Wednesday and we'll have them in the shop 3-4 days after that...

Why wait we have 5 extra..
Get the Orignal and Best sShafts, Get 700 ftlb torture tested , 8000 rpm 2nd gear burnout abused and still going strong shafts.
Get a Rage-Tek Accelerator Shaft!!!!

Stock 3.647 first gear
Shift RPM RPM after shift
... 1 - 2 2 - 3 3 - 4 4 - 5 5 - 6
4400 2467 2941 3048 3513 0
4500 2523 3008 3117 3592 0
4600 2579 3075 3187 3672 0
5200 2916 3476 3602 4151 0 You got surge with your 310whp stock turbo on the 1-2 shift
5400 3028 3610 3741 4311 0
5800 3252 3877 4018 4630 0
6000 3364 4011 4157 4790 0
6200 3477 4144 4295 4950 0 You got lag with a 50trim
6600 3701 4412 4572 5269 0
7200 4037 4813 4988 5748 0
7600 4262 5080 5265 6067 0
8100 4542 5415 5611 6466 0 Still lagging on a hp61 or bigger on the 1-2 your losing .3-.5 in the 1/4

How much would it you cost you to drop .3-.5 tenths in the 1/4??? Why spend $1000 on a standard input shaft, Your making the power to break a shaft, so you probably need the better gearing. Cancel your preorder with those other guys and step-up!!

2.98 first gear

Shift RPM RPM after shift
..... 1 - 2 2 - 3 3 - 4 4 - 5 5 - 6
4400 3019 2941 3048 3513 0
4500 3088 3008 3117 3592 0
4600 3157 3075 3187 3672 0
5200 3568 3476 3602 4151 0
5400 3706 3610 3741 4311 0
5800 3980 3877 4018 4630 0
6000 4117 4011 4157 4790 0 Great for max effort stock or stg 3 turbos shift without compressor surge
6200 4255 4144 4295 4950 0 Also great for lag elimination on 50 trim or bigger with stg 0/1 rev limit.
6600 4529 4412 4572 5269 0 Cut 60' times also.
7200 4941 4813 4988 5748 0
7600 5215 5080 5265 6067 0
8100 5559 5415 5611 6466 0 Go ahead put Rage RaceSpec cams in. Peak Tq 5600rpm Peak HP 7900rpm!

NeonDan · 05-01-2008, 05:12 PM

price?

chuck's_srt-4 · 05-01-2008, 05:15 PM

Price is going to be up there. These aren't for the faint of heart!

Nemo, is it just me, or are you making a special treat on the spline end of those shafts?

Can't wait to get mine!

NemoFoss · 05-01-2008, 05:16 PM

$1800... Includes new 1st gear for the output shaft and The Rage exclusive Input shaft support pilot bearing System...!!!

NeonDan · 05-01-2008, 05:17 PM

gotta pay to play and to get the best your wallet must weather the test

NemoFoss · 05-01-2008, 05:20 PM

Quote: Originally Posted by chuck's_srt-4

Price is going to be up there. These aren't for the faint of heart!

Nemo, is it just me, or are you making a special treat on the spline end of those shafts?

Can't wait to get mine!

That special Treat is what is gonna make WOT shifting so nice... The extra support is going too greatly reduce shaft bounce. It will also reduce the possibility of gear spread under high loads.
Another Rage Engineered First.
Available only from us.. Yeah it costs more but theres a reason for that..

aaronneon@RealTune · 05-01-2008, 05:29 PM

Hell yea! Cant wait for them to come

NeonDan · 05-01-2008, 05:33 PM

if this and good driving doesnt do the trick for 9s.....i dunno what 5sp owners should be saving their pennies for

chuck's_srt-4 · 05-01-2008, 05:33 PM

AWESOME! I love your ingenuity! I suspected you might incorporate a pilot bearing system when you spoke of a "bonus" in your first thread about these shafts! In fact, I think I PM'd you asking if such was the case!

Great idea, Nemo!