Question for Enkei RPF1 owners - SRT Forums

IBKuz · 09-30-2009, 10:43 PM

I have a question concerning the back face of the wheel behind where the studs pass through the rim. On the RPF1 is this face solid (flat) or are there pockets from the moulding process?

I am asking because I own a ACR and I'm trying to find 16 x 8 rims with very little success in our 5x100 bolt pattern and offset. My wheel guy noted that if I can find a set of rims that have a solid back with another 5 bolt pattern, he can get the 5x100 holes machined for me. As the RPF1 rims come in a 16 x 8, 5x114, 32 or 38 offset, I was hoping this might work out for me. I would really appreciate feedback from someone who owns this wheel.

Thanks in advance for any feedback.

Ian K.

PS Anyone have a line on Kosei K1 16 x 8 blank rims?

evo77 · 10-01-2009, 09:41 PM

IBKuz · 10-01-2009, 10:13 PM

There must be an interesting story behind the picture

I guess I will have to look elsewhere for another rim

Thanks for the quick response

uturner · 10-01-2009, 10:44 PM

What's the interesting story behind the wheel? I see the whole bottom of the wheel is destroyed but why?

I was so about to get these.