Yet ANOTHER HID Wiring thread!

[p1llar]

So i put my VVME HID Kit in tonite. Having the same issue as everyone else with, i have a single beam hid kit, and it only works when i flip the hi's on. Kinda sucks because i can't use my lo's.

I've read the 're-wire' mod in the harness with the 3 wires but i only have 2 wires since it's a single beam kit. Red and Black, i've switched the pairing around but either nothing works or it'll only work on Hi's.

Anyone with a sigle beam hid kit care to chime in?

[Gmanigio]

Just switch the wires.......Done...

[aww sheet]

Quote: Originally Posted by p1llar

So i put my VVME HID Kit in tonite. Having the same issue as everyone else with, i have a single beam hid kit, and it only works when i flip the hi's on. Kinda sucks because i can't use my lo's.

I've read the 're-wire' mod in the harness with the 3 wires but i only have 2 wires since it's a single beam kit. Red and Black, i've switched the pairing around but either nothing works or it'll only work on Hi's.

Anyone with a sigle beam hid kit care to chime in?

can you take a pic of the connector to the headlight harness

[LilSparkPlug]

Use the purple instead of the red. Or Red instead of the purple. One is the high beam, one is the low beam. Swap where you have them like Gmanigio said and you should be fine.

[gt5oh]

HELP!! Hi-Beams and Low's are reversed ??

[morgantj13]

i think the purple in high beam(i think), but switch it with the other wire, and it should work like normal. are you using a relay btw?

[haknslash]

purple wire is low beam.

this is what I used to send out with some retros if it helps....