Is there an easy way to brighten the halos on projector housing headlights?? - Page 2 - SRT Forums

-ND4SPD- · 08-19-2009, 09:30 AM

Quote: Originally Posted by botlfed98

i removed the box and they came on for a split second like the blew. So where do i get these CCFLs?

I said they would die a certain death if you remove it.

I have some spare halo LED's if you need them.

After doing more testing about 2 weeks ago that box limits the voltage down to just under 12v. I tried feeding it the 13.5 v off the car's system & it reduced it down to about 11.0v. Then I tried as high as 18v & it still reduced it down to about 11.8v.

You could do a resister I suppose but I'm not sure how it would hold up to some of the spikes that can occur (especially for those with aftermarkets stereo systems)?

botlfed98 · 08-20-2009, 08:30 AM

haha well i thought you meant more than half of a split second LOL. Do you have just the LEDs or the whole part with the rubber boot where you just push into the headlight housing?

-ND4SPD- · 08-20-2009, 10:28 AM

Quote: Originally Posted by botlfed98

haha well i thought you meant more than half of a split second LOL. Do you have just the LEDs or the whole part with the rubber boot where you just push into the headlight housing?

I have both. You'll only need the LED's though.