HID Problem

[BoostedSkittles]

I boought a set of vvme Hid for my srt-4 i put them on and turned them on the work fine but when i go to turn my fog lights on the do not come on and also this makes my brights come on and when i pull the knob to make my brights come on nothing happens. also my bright indicator on the dash stays on always. any ideas or what this is thanks

[mikegps2009]

Quote: Originally Posted by BoostedSkittles

I boought a set of vvme Hid for my srt-4 i put them on and turned them on the work fine but when i go to turn my fog lights on the do not come on and also this makes my brights come on and when i pull the knob to make my brights come on nothing happens. also my bright indicator on the dash stays on always. any ideas or what this is thanks

I'm having a same problem. anyone can help?

[whiteSRT69]

might have mixed up the Prongs attacking to the factory harness. where your stock bulb would click in there are 3 holes for the HID prongs to go in, switch them around because you might have them backwards, 1 prong is power for low-beam 1 prong is grount 1 prong is power to Hi-beam,

[srt4nathan]

i have hid on fogs and headslights and they are all vvme kits....like ^^^^ said you might have mixed the progs around..and i donot have the highbeams with mine..if you turn the high beams on the fogs and headlights turn off..but you wont need high beams with them,they are wwaaaaayyyy bright!!!

[x148]

I have a xenon dual hid high/low and fogs, i had to hard wire in my fog lights and my high beam light stays on in the car as well, i went through and switched the prongs but it didn't come off, idk if there is a bypass wire to turn that off or not i was installing them in the dark didn't have much time to fiddle with it.

[98rt_canadian]

Can one of you guys take a pic of the fuse/relay compartment on the side of the dash? I need to see what stock relays are there.