hak, another thread for you

[distinctdev]

I have the Superstar 194 LED's installed in my gauge cluster and my gauges a few months ago, recently i lost i think 3 bulbs. It all started with the one in my oil pressure gauge, it would blink and blink and blink, and it actually still does sometimes, this specific bulb is soldering into the stock boost gauge lighting line, and the boost gauge also uses the same LED bulb but only the oil pressure gauge blinks so im pretty sure its not the wiring. Then I noticed 1 and now maybe 2 of my bulbs behind my dash do not light up. Now for the even stranger part. The first bulb issue started for on my way home from the first day driving my car with the AEM ems. When i installed the ems, I also removed a grounding cable i once installeded that when from the battery to the Motor, do I just have bad bulbs or a bigger problem i should look into?

[haknslash]

I would look into your solder to see if perhaps its not getting a solid contact. I know I had a few of mine blink on me but that was directly atributed to what is known as "cold solder", in other words not a great solder. The solution was to resolder the ones that were causing me grief. Hope that is your case. I highly doubt AEM EMS is directly related to your LED issue and is more than likely just one of those coinkydinks

Check your solder joints and let me know if that fixes your issues. We'll go from there afterwords....