fog light installation - SRT Forums

bassmixsrt4 · 06-04-2005, 04:57 PM

Why did they make it such a tight fit behind the right fog light? I can't get my hand up there to remove the bulb. Any suggestions? I thought of taking out the windshield washer fluid container....

JCturboT · 06-04-2005, 05:07 PM

Take out the headlight.Once out it is easily accesible.

Jeff

bassmixsrt4 · 06-04-2005, 05:10 PM

okay, i'll try that right now.

bassmixsrt4 · 06-04-2005, 05:15 PM

Is there some trick to getting the headlight out??

bassmixsrt4 · 06-04-2005, 05:25 PM

Got the headlight out. Still can't get the stupid bulb out

bassmixsrt4 · 06-04-2005, 05:34 PM

That was ridiculous....I took the whole fog light assembly out to change the bulb....Thanks for the tip.

AudioFan · 06-04-2005, 07:09 PM

How did you took the fog assembly out? I need to do this
Thanks

Speedooooo · 06-05-2005, 10:24 AM

It's really easy guys.

1. Take out the 3 screws on the top of the front bumper.
2. Take out two long bolts from each headlight.
3. Remove headlights.
4. Driver side foglight should be easily accessible now. There are two bolts (plastic) that hold the foglight to the foglight bracket. Remove them and you can remove the foglight.
5. For the passenger side headlight you need to remove the horn. It's just one bolt.
6. Then remove the two bolts that hold the foglight to the foglight bracket as before. Remove the the foglight.

Venomm · 06-05-2005, 11:53 AM

Here are a couple of sections from my HID Fog Light retrofit how to that covers how you can remove the fog lights.

AudioFan · 06-05-2005, 12:17 PM

That what I need it, thanks a lot

Now I only need time to install my HID's

JCturboT · 06-05-2005, 06:02 PM

Quote: Originally Posted by bassmixsrt4

That was ridiculous....I took the whole fog light assembly out to change the bulb....Thanks for the tip.

Why did you have to take out the whole assemble to change the bulb?

I did my the eyebrows on my friends SRT-4 today and while the headlights were out I double checked myself, the foglight bulb is easily removed.

Jeff

bassmixsrt4 · 06-06-2005, 02:17 AM

I didn't have to remove the horn. Thank god for the rachet wrench.

supercooper · 06-06-2005, 04:41 PM

Quote: Originally Posted by bassmixsrt4

I didn't have to remove the horn. Thank god for the rachet wrench.

Ditto. Flex-head ratcheting wrench is the bomb. Jack car up, undo 2 bolts and unplug wire to fog lamp. Pull fog lamp assembly out the front. Easy as pie.