oh yes, camera mount for the win. can we get some pics of the mounting spots.
Level of difficulty putting in? Im sure it isnt very hard but I would like to keep my interior as clean as possible and dont want to run the risk of fucking it up with my clumsy ass.
__________________
The purpose of ignition advance is to account for the lag time following spark ignition for combustion pressure to peak at 15 degrees AFTER TOP DEAD CENTER. A little fyi !
It looks like a nice harness bar, Willy....which should be good for autocross and car shows.
Everyone needs to understand a couple things though:
1) Most harnesses are not street legal (except Schroth)
2) Running a harness without the proper seat is worse than the factory belt in a crash. If you have a major impact with a harness and it is not "captured" within the seat, it could easily slide over the edges of the seat and off of your shoulders. That means everyone with viper seats needs to get inserts or a "race" seat. The airbag seats can run the harnesses between the head rest post (of course this will be too close and rub the hell out of your neck, and if the headrest comes off you are in the situation mentioned above).
I don't mean to dampen anyone's spirits, but too many people die in these cars already and I want to keep everyone as safe as possible. Chalk it up to the old guy in me!
If you need a good quality camera mount with excellent vibration dampening, try I/O port racing. They have some nice cushioned bolt-on mounts.
__________________
***
Check out www.trackpedia.com for turn by turn analysis as well as in-car videos from tracks all around the world!
It looks like a nice harness bar, Willy....which should be good for autocross and car shows.
Everyone needs to understand a couple things though:
1) Most harnesses are not street legal (except Schroth)
2) Running a harness without the proper seat is worse than the factory belt in a crash. If you have a major impact with a harness and it is not "captured" within the seat, it could easily slide over the edges of the seat and off of your shoulders. That means everyone with viper seats needs to get inserts or a "race" seat. The airbag seats can run the harnesses between the head rest post (of course this will be too close and rub the hell out of your neck, and if the headrest comes off you are in the situation mentioned above).
I don't mean to dampen anyone's spirits, but too many people die in these cars already and I want to keep everyone as safe as possible. Chalk it up to the old guy in me!
If you need a good quality camera mount with excellent vibration dampening, try I/O port racing. They have some nice cushioned bolt-on mounts.
Now if only the ACR Viper Harnesses were easily available. I think they'd match the ACR SRT perfectly...Too bad they're like 1k a piece!
Last edited by SilverSerfer : 04-24-2008 at 01:11 AM.
Now if only the ACR Viper Harnesses were easily available. I think they'd match the ACR SRT perfectly...Too bad they're like 1k a piece!
Or for ~$129 bucks (iirc) you can buy the CBD harness slots and install them yourself or take then to a upholstery shop and have them do it for about $100 (I had both fronts done for that price).
The AutoGuide.com network consists of the largest network of enthusiast-owned enthusiast-operated automotive communities.
AutoGuide.com provides the latest car reviews, auto show coverage, new car prices, and automotive news. The AutoGuide network operates more than 100 automotive forums where our users consult peers for shopping information and advice, and share opinions as a community.
!
Very interested 
Linear Mode
