FUTURE DaimlerChrysler Products - Read & Heed - Page 7 - SRT Forums

georgejetson · 12-10-2006, 07:17 PM

Quote: Originally Posted by MoparMan

Quote: Originally Posted by PVOMan

bump in viper performance is expected

The question is "how much?" Right now, the talk seems to place the HP number at 600 or so, down from the 650 we were hearing about earlier in the year.

You probably know this, but Blue Devil is going to come in above that. Of course, that may be another year-plus off.

l3it3r · 12-10-2006, 08:35 PM

Quote: Originally Posted by MoparMan

Quote: Originally Posted by PVOMan

bump in viper performance is expected

The question is "how much?" Right now, the talk seems to place the HP number at 600 or so, down from the 650 we were hearing about earlier in the year.

Quote: Originally Posted by PVOMan

srt12 for chrysler, halo car is needed

ZC or a different platform?

Quote: Originally Posted by PVOMan

firepower on ZC platform

This is important, because if the ZC platform sees production the Viper will continue beyond the next couple of years.

SRT-12 will be based off the ME 4-12 Prototype, and will fuel my desire to be a millionaire.

MoparMan · 12-10-2006, 09:57 PM

Quote: Originally Posted by georgejetson

Quote: Originally Posted by MoparMan

Quote: Originally Posted by PVOMan

bump in viper performance is expected

The question is "how much?" Right now, the talk seems to place the HP number at 600 or so, down from the 650 we were hearing about earlier in the year.

You probably know this, but Blue Devil is going to come in above that. Of course, that may be another year-plus off.

Yep. Word is that they're leaving "room to grow" in the 8.4 and are waiting to see where the $100k+ Blue Devil comes in at, performance-wise.

hemidakota · 12-11-2006, 10:20 AM

Via: www.Automotorsport.se

Production based Avenger [Euro] is up on the web.

hemidakota · 12-11-2006, 10:22 AM

I was told that room enough to taunt GM Performance Division to play the game. However, there is a blown V8 in the mix for a Chysler ZC sports car.

hemidakota · 12-11-2006, 10:24 AM

Quote: Originally Posted by suzq044

well we all know that the HORNET is coming from China, maybe to be classified as a truck? despite the lack of size? who knows.

everyone agrees on the caliber coupe, which very well may be the 'razor' vehicle we're all hoping for.

the new brand? .. AMC;
Hornet?
Javelin for Razor?
Gremelin as a Caliber-based vehicle?
Ambassador.. maybe an LY/Challenger counter-part?

ram - 6.3L V8 would be my guess (the new engine, shown in the Challenger concept)

and we've already seen the SRT12 -- look at hemi's sig for a big ol' hint. lol

Update Chrysler halo car with the latest techno and design cues that will be adapted from the next Viper and Chrysler twin.

The MegaCab sells in small quality as expected. Ram needs a new stroker motor that is not only VVT but fuel efficent [MDS].

Jagok1 · 12-11-2006, 06:30 PM

Quote: Originally Posted by hemidakota

I was told that room enough to taunt GM Performance Division to play the game. However, there is a blown V8 in the mix for a Chysler ZC sports car.

Nice.........

suzq044 · 12-12-2006, 01:04 AM

hemi - did u happen to notice the LANCER .. http://www.automotorsport.se/bigpix/...sport_stor.jpg

hemidakota · 12-12-2006, 09:13 AM

Quote: Originally Posted by suzq044

hemi - did u happen to notice the LANCER .. http://www.automotorsport.se/bigpix/...sport_stor.jpg

Yes.....noticed the slit lamps and then look at the Nassau? This is where the future line common them is heading. Smaller grill area in the front also is being changeed out.

hemidakota · 12-12-2006, 09:15 AM

STOCKMOPAR.COM - - How about a 2009 Chrysler 'Cuda? The possiblity of driving a brand new Cuda! Well the rumors are flying about a possible Chrysler Cuda concept that could see its debut at the 2007 SEMA show. When someone had inquired about the 'Cuda concept and the response that they got from Chrysler was:

We are pleased to read of your interest in the Chrysler Cuda concept vehicle. At this time, DaimlerChrysler has not released any plans that indicate the future production of the Chrysler Cuda. If built, The Chrysler Cuda concept vehicle would be built on the same platform as the upcoming 2008 Dodge Challenger, and would be production ready around the same time. We encourage you to stay in touch with the Chrysler.com website as well as your local Chrysler dealerships for future product updates.

So if this response is correct it appears that they are planning at least a Cuda Concept Car. Also that it would be ready about the same time as 2008 Dodge Challenger!

If they do produce the Chrysler Cuda it would probably have a similar range of engines to that of the 2008 Dodge Challenger. Which will probably include the 6.1L Hemi, or even the new 392 Hemi engines!

Do you think it would be right for Chrysler to produce the Cuda under the Chrysler name because the Plymouth company was dissolved a few years back.

Stay tuned as more developments come about the possible upcomming Chrysler 'Cuda!

jdgeary · 12-12-2006, 09:19 AM

This is badge engineering at it's finest. I just can't wait to see the Challenger.

ENapa · 12-12-2006, 09:46 AM

Any updates on the Avenger SRT 6? LOL I know, I know, I'm persistant.

hemidakota · 12-12-2006, 09:55 AM

georgejetson · 12-12-2006, 12:16 PM

Quote: Originally Posted by hemidakota

If built, The Chrysler Cuda concept vehicle would be built on the same platform as the upcoming 2008 Dodge Challenger, and would be production ready around the same time.

Emerging consensus on the Allpar board has Challenger production start sometime between September and November of 2007. What do you think?

MYTsmylee · 12-12-2006, 12:23 PM

not too much to look for at the next auto show