Working On Car Now...does The Agp Cai Become A Short Ram

[SHANTSRT4]

does anyone know if the agp cai intake becomes a short ram by using only one of the pipes. I know one of the intakes on here does it but i wanna know if i can do it to my agp right now.

[master_1011]

Try it and find out....

[Nosfurato]

If vacume lines fit,.. air filter fits.. hell, why not!

[sti_zee]

should work fine, as should the 4"

[SHANTSRT4]

I already knew i can only attempt this with the pipe that accept the maf sensor on it but I also realized their is the other tube that comes onto the intake as well. The tube im talking about i the one coming out of the top right side of the engine and connecting onto the other intake pipe. Anything I can do cause i doubt its ok to just leave it disconected

[stage3matt]

Quote: Originally Posted by SHANTSRT4

I already knew i can only attempt this with the pipe that accept the maf sensor on it but I also realized their is the other tube that comes onto the intake as well. The tube im talking about i the one coming out of the top right side of the engine and connecting onto the other intake pipe. Anything I can do cause i doubt its ok to just leave it disconected

whoa whoa whoa, where is the MAF sensor

If you are talking about the temp sensor then yes, you can just leave that sensor ziptied in the bay somewhere (plugged in of course).

[SHANTSRT4]

can someone please helpme right now. The tubes that are going from the car onto the pipe are the maf/temp sensor thats coming from the all the way right side of the engine bay and going into the tube and then theres the black tube thats coming of the engine side and connects onto intake pipe and then theres one more that is already just loose. Which ones HAVE to be on because thhe intake tubes each only have one place for tube to connect.

[master_1011]

Quote: Originally Posted by SHANTSRT4

can someone please helpme right now. The tubes that are going from the car onto the pipe are the maf/temp sensor thats coming from the all the way right side of the engine bay and going into the tube and then theres the black tube thats coming of the engine side and connects onto intake pipe and then theres one more that is already just loose. Which ones HAVE to be on because thhe intake tubes each only have one place for tube to connect.

Technically...you don't NEED any of them in the intake.

But, I would keep the one coming from the valve cover on there. Ziptie the IAT sensor (not a MAF) out of the way, but keep it connected electrically.