Just got car back. Vacuum Problems!
Ok guys I just got my car back from the shop and I know they didnt hook something back up right as far as vacuum lines go. When the car is running at idle the BOV will constantly blow off. If i just give it a little bit of gas it totally goes away. The second thing I noticed is that my Greddy EBC does absolutely nothing. The car will spike about 20 pounds no matter how I have it set-even off. I tried following every vacuum diagram I can find and I cannot figure out what is wrong.
The pink line goes into the forge bop
The Blue line goes into a T with a black line, and then is connected to the "closer to the front" nipple on the turbo
The big fat green one goes into a T which is connected to the solenoid for the EBC as well as hooked up to the hidden nipple on the turbo
And finally there is a vacuum hose from the EBC solenoid right to my WGA
Do you guys have any ideas? Im startin to get pretty pissed here and I know the guys at the shope will have no idea what im talking about. I'm leavin it in your hands. Thanks guys!
|
Linear Mode
