*****Dyno Numbers and Sheets*****

[Black'sBlue04]

well I did real good....lol....pulls done in 4th gear all back to back, no cool down.

1st run 217.8 hp......288.6 tq
2nd run 206.7 hp......273.2 tq
3rd run 207.9 hp.......306.8 tq

I think I am pulling timing because my graph spikes up and the falls hard...no curve at all

[Nasty_NAS]

before the dbb 50 went in

[ChriSRT-4]

Mods:
Mopar S3R with toys
Mopar Performance Plugs and Wires
Mopar STS
Mopar Lowering Springs
Mopar CAI
Mopar BOV
Exhaust Depot Wuss FMIC
BB TurboBack Exhaust
Lorenzo 60mm TB
Devils Own W/A Injection Kit
Filled Motor Mounts
Ported Intake Manifold
BDJs Intake Manifold Gasket
180 Thermostat
Greddy TT
Traction bars
$20 Catch Can

[Bflaker]

265whp and 336wtq

After dynoing I found I had a vacuum cap blown off at the original boost source for the boost gauge.

Between 4000 and 6000 rpms, hp is between 240 and 246.

tq spikes 336 at 3800 and falls to 265 at 5200 rpms

Mods:
AGP WGA - Spike 20 psi
Map Clamp - Spike 12.0 A/F's
Mopar Stage 1 PCM
Injen Intake
MaxxFab 3" Catless Downpipe
NGK Iridium Plugs Gapped .035
PTPerformance 75psi FPR Mod
MSD Coil and Wires

[sittnon18s]

does any one have numbers on s2 w/o toys???

[srt4fun80]

Dynoed two s2 cars no toys Last Saturday

One was 265hp 290ftlbs
the other was 245hp 280ftlbs

The second one was just s2 no toys and an exhaust
The first one has Boomba fuel rail, downpipe, exhaust, agp wga, intake

[sp33d]

Model/year of SRT:
2004 SRT-4

Please specific power adders (at the time)
K&N CAI intake
Mopar BOV
stg1
Agp WGA
Apexi SAFC 2
Greddy EBC
stock plugs

Please specify Actual boost seen (SRT-4):
21 spike 15 hold

Please specify Fuel (mix content if a mix is used)
Pump Gas 93 octane

Please specify Turbo kit and size/trim of turbo (SRT-4)
Stock Turbo
260HP 293 TQ

[SRT411106]

wow those are some awsome numbers Sp33d fo just the mods you have. I take it those are the numbers taken after you were tuned using the SAFC? If so what were your afr's?

[srt4fun80]

please, no questions in this section. if you have questions reffer them to pm.

[siberian57]

dyno'd 280 (technically 278)whp and 310 tq @ swift with the mods in my sig, dyno vids and sheets are on my cardomain here: http://www.cardomain.com/ride/2268125/3

[BlackStage3Srt]

Here was my first dyno..it was HOT as hell outside so Im guessing on a cooler day I might put out some better numbers but Im still satisfied! 298 HP! Heres the sheetsorry it's so big but it's the only way you can see the numbers!!))

[2004silversrt4]

This is on Stage 3 Hom DAB 2, Mopar CAI, Big FMIC, Stock TB, MaxxFab 3" DP with Cat, Mopar Cat Back, 180 Stat, Stock Plugs .035, Samco Pipes, Rice Valve (No Leaks )

[srad2drag]

^^^^^^^^Dude......I would change out the stock plugs and get the reccomended 4306's.Stock plugs are too hot for the hp you are making......

[2004silversrt4]

Quote: Originally Posted by srad2drag

^^^^^^^^Dude......I would change out the stock plugs and get the reccomended 4306's.Stock plugs are too hot for the hp you are making......

Thanks Srad...Been meaning too. Does the dealer carry these???

[lowride]

Model/year of SRT:
2005 SRT-4

Please specific power adders (at the time)
K&N drop in
stage 2 w/o
Kinetics WGA
ED Wuss fmic
ED hard pipes
3" tbe no cat, HKS muffler, stock O2
14 lbs wheels ???

Please specify Actual boost seen (SRT-4):
20 spike 15 hold

Please specify Fuel (mix content if a mix is used)
Pump Gas 93 octane

Please specify Turbo kit and size/trim of turbo (SRT-4)
Stock Turbo
278 whp 327 ft lbs