Quote: Originally Posted by
BoostJunkie05 
The skim is under the top of the dash above the radio. The remote start could be playing havoc of the oem anti theft, since the remote start had to be interfaced into the anti theft system that module might have lost programming causing the car to not start its kinda like this on a remote start
_____ Key Cylinder_______RemStrt Bypass________Skim
Compustar system have a tendency to do that, I like any DEI products...Viper..Python so on always work perfect.
The factory alarm has also got to be interfaced in for an aftermarket alarm--keyless---rem strt to also control it. I have an alarm I put on mine and basically in order for the alarm to control the factory alarm resistors have to used to control the door locks and arming the factory alarm, and to disarm also has to go through resistors and unlock has to be double pulsed to disarm the factory alarm.
100% of the effectiveness of any security and convenience system is the installation.
I did notice that my red light does not flash on my dash anymore. I think I am going to remove the remote start anyways bc I don't use it anymore. I should just be able to remove the remote start componets and hopefully the factory alarm should work again.
