Quote: Originally Posted by
srt4moster 
i have a spare one, i can measure it but i dont quite understand what you want me to measure.
I know this isn't an SRT clutch master cylinder, but this pic should give you an idea of what I need measured.
Just measure the inner diameter of the cylinder bore. I am looking for a fairly precise number. So you'll need a dial bore gauge, or at least a caliper.
I'm looking for a number along the lines of either: .625", .700", .750", .875", or 1.000".
It may not be any one of those sizes, as those are simply some of the common sizes found in the aftermarket.
I'd greatly appreciate it! Thanks!
