Quote: Originally Posted by
srt4crazy05 
u dont need a how to for unscrewing some 10mm bolts. all u need is a good socket set, a ratcheting 10mm wrench(for the top bolt) and pb blaster(for every bolt)
12mm socket will unbolt the wga. the more extensions to choose from the easier it is. the hardest part really is taking out the bolts. its easy. make sure u know how to adjust the wga(search on how to do it) and start low at like 14psi in 4th and adjust it accordingly till u get ur desired boost(no more than 17-18 hold) in 4th. then ur good to go.
I did not mean a how-to for the heat sheild i mean for the WGA.
