All headlights/ taillights are vented to allow equalization of air temps preventing excessive condensation. Some minnor condensation is normal on all headlights, if it's pretty bad then you probably have a leak as well.
Remove the headlight. Remove all the bulbs. Use a hair dryer to dry our all the extra mounture inside. Re-install the bulbs & make sure they are seated & all gaskets are in place. If you still have condensation issue then you have a leak around the lens. Repeat steps except use silicone sealant around the outside edge. Allow to dry 12-24hours before re-installing & using.
__________________
John Ruckman
Stage 3 with all the goodies
See My Ride
ND4SPD DESIGNS
Custom SRT Lighting & Styling Specialists
Service, Products, & Pricing Here
Group Buy Instant Notification Here
|
