Quote: Originally Posted by
uncommon© 
Ok, so do what? LOL
I have a wot box/2-step and I'm also adding the boost box. I have to solder together the red / black wires on the wot box harness??
no leave the wotbox alone.. thats if someone wanted to convert their wotbox into a boost controller.
on the solenoid you will run the top port to pressure and tee it to the bottom of the gate. then run from the middle port of the solenoid to the top of the gate. just as you would any other solenoid... the middle port which usually goes to the wga on a stock setup will now become the nc port..make sense?
