Quote: Originally Posted by
goats srt 
Can't u just hook up the external wg like a reg wga and just put the line on the bottom fitting like if your using a mbc and put the lower psi spring in the wg
It should work with the normal vacuum routing for the external wastegate setups. The only change I think we will recommend is swapping the normally closed and normally open solenoid ports. That way 0% duty cycle will equal minimum boost instead of 100% duty cycle. I think this a safer way to do it, since if something fails in the wiring, it is likely to fail open, rather than closed. Then, the failure mode will be minimum boost, rather than maximum boost.
