Quote: Originally Posted by
phrozen 
The second boost map for switching with the button is not in there yet, but I should be able to put that one in the software this week. That feature is pretty easy to put in the code.
The boost targets are programmable for each gear. Once set, the boost controller will try to maintain that boost setting for each gear across all RPM, including up to redline. It is now holding boost to redline better than it shows in the video. We will post up a new video soon.
The amount of boost spike will be determined by how high you have the proportional gain set. If the gain is higher, you will get more boost spike and slightly faster response. If you drop it lower, you will have less boost spike and a slightly slower response.
sweet ...thats 100% wat i was looking for...fuk the profec B....lol great work
so that button on the box will be a 1/2 boost chart switcher?
__________________
Quote: Originally Posted by
killaneon boogaloo is always good for a lulz
"i need you, like a little boy's salad needs some neverland ranch"
......SRT-4.....the domestic with an identity crisis.......
Stage2 @ 20psi + bolt-ons out the @55
my quest for 250mph in the quarter mile
