as far as extra parts? Some sort of bypass to get past SKIM.
as far as installation? Assuming they hooked up the entire Ignition Harness, you will need to interface with the clutch, interface with a clean tach signal, possibly hook into your brake wire, install the SKIM bypass, hook into your e-brake, and possibly do some programming.
If you are not versed in the installation of alarms/remote starters (and I mean have a VERY good understanding of 12v electronics and have the proper tools) then I would NOT recommend you do this yourself. Find a local who does install these for a living and have them take care of it for you, problem being the shop that installed the Alarm will most likely void any warranty on the unit if they see their install was tampered with.
__________________
2009 1320x threads:
III
Last edited by stage3matt : 01-11-2009 at 03:10 AM.
|
