Timing
It does look particularly low,,at least lower than most other logs. I thought it might be the high ECT and ACT but after checking several member's logs they're not that far out of line as I thought.
I'm thinking its just the slow rate of change in RPM that makes the timing look lower. Check the log I emailed you titled "TheGame_4th_1.log". Its a 4th gear log also with similiar ECT/ACT and timing. His timing is a 2-3 degrees higher after 4500rpm but he has no ST/LT Knock
IC
To check your DFMIC efficiency you need to check the Pre IC temps. If boost leaks are causing ususally high outlet temp the ACT might not be too bad.
Knock
You have a bit of Long term Knock(1.5degrees) after 4K rpm
__________________
"Just because someone goes fast doesn't mean you should do whatever you think they did.
This path assumes they knew what they were doing, which isn't necessarily the case"..........RB Racing
|
