Quote: Originally Posted by
sfla_srt4 
You should already have that catch can on the car, when you pull out your stock IC, youll see why
.
I say the biggest thing though is the traction issue.. If your not picky about the vibrations and noises, then get solid MMs. There are plenty of threads that discuss the MMs, so just do a quick search..
I know why. I Already have oil all over the place in my driveway from the stupid valve cover lines going into my cold pipe and then dripping from what used to be a loose clamp. The clamp is tight, but it still was dripping from somewhere. I am already getting the AGP solid motor mounts, just didn't think that was something that needed to be mentioned as it doesn't affect the actual tuning of the DSP. I do have S1 springs if that helps at all with traction, and I am looking into drag radials, because I don't wanna snap an axle on slicks.
