Coolingmist installation help. Im stuck!
Alright my car had the kit installed (standard 150 psi kit)and one day it stopped working spraying at wot.... checked everything and everything was fine...tested it and it sprayed. odd.. so i decided to get a new boost switch relay and pump... i installed it and tested it and it sprays.... (i put the normally open wire to the not used port and it sprays... so i put it back to the normally open wire and connect the nozzle to the cold pipe and take it for a spin several times and no meth......IM 100% sure it doesnt spray since my afr stay the same.
what else can i check for? obviously the fuse is good and the pump works... im 97.5 percent sure the wiring is correct... any ideas?
|
