Crank to De-Stroke to 2.2L
Is anything like this available yet? I know DCR shrugs de-stroking off like its "inferior" to their 2.6l stroker engine, but I dont want a drag strip car I want a fun street car and I would really like to de-stroke my engine to 2.2L. Maybe a stroke similar to the 80s turbo dodge 2.2 turbo engines.
I believe the rod length and cylinder bore of the 80s 2.2l and the Srt-4 engine are the same, and the T3 engines proved to make good power and rev out well. If the SRT engine was de-stroked down to 92mm it would have pretty much the same rod/stroke ratio (unless longer rods are used to maintain the piston placement in the SRT engine's cylinders).
I was just wondering if anybody had looked into this further and if there are any options out there?
Last edited by ThirtyTwo : 09-03-2008 at 09:10 PM.
|
