you need to select serial then select the virtual com port that it is using
__________________
DCR: 2.6 over 40 stroker, Pro series Head w/ Crane 18, Input Shaft, Intake manifold w/ Tial BOV, CP Ignition
AGP: GT3582R turbo kit
Mopar: Sway Bars, S3R CO, Ti Strut Bars,
Rage-Tek: LCA, TOB, Triple Fuel Pumps, 1000cc Inj 3/4 fork
Autometer: WB, Boost, Oil PSI, Oil Temp, EGT, FP
ClutchMaster: Twin Disk
AEM: EMS w/ 3.5 BAR sensor
JMB: 4in Intake, Hotside Hardpipe
Boomba: All 3 MM
|
