Yea, I went 2 M5's an it is a ALOT of meth.
But I noticed that its best to run 2 independant checkvalve right at the nozzle holder. Whats happening is that from the checkvalve, Ive got about 4-5 inched of tubing going to each nozzle, after it sprays, it drips EVRYTHING in the two tubes thats left over AFTER the checkvalve.
I made my "Meth Purge" system, and I notice sometimes that when I do purge (for a split second), it doesnt affect the A/F because the meth in the lines AFTER the CV is gone and has to refill again. 2nd push of the purge DOES work since the lines are filled again.
I think with a 50 trim, 1 M5 and 1 M3 or just 1 M7 before the sensor.
__________________
 Some things are pathetic! 
Performance Mods: AGP S3D 48lb - Returnline - Mopar Stage 2 w/o Toys - DW 650cc - TurboXS HPMBC - Maddog STS - MaxxFab 3" DP w/o Cat Magnaflow Muffler - AIS Intercooler - ED LPP - ED UPP w/ HKS BOV - Injen Intake - NGK V-Powers @ .032 - FBM Ported Intake Mani/Spacer - DCR 55mm Throttle Body - DCR Oil Mod - Devils Own MethInjection, M5 - DTEC - AEM UEGO
385HP and 385TQ |
