Quote: Originally Posted by
ACRucrazy 
Hey all, Im really not sure where a post like this belongs, however I am curious if the stock or any staged PCMs will throw a CEL if the EVAP or power steering pressure sensors are unplugged?
Id assume it would show up when scanned with a reader, however does anyone know if the PCM just monitors these, and will they throw a CEL?
The reason I ask is im in the middle of doing a full SRT conversion in my NYG (entire SRT harness, motor, pcm, etc) I will not be using the EVAP or have power steering.
Im sure someone has unplugged these before?
Any comments would be greatly appreciated.
Yes you will get a cel if they are unplugged. I've been getting an intermittant power steering switch cel recently. Its probably just a bad wire.
I'd leave the ps switch and evap solenoid plugged in. You can remove everything else, just tie the small parts up out of the way.
