Correct me if im wrong, but that is a SAFC, not an SAFC II... Also, im not sure about on the SAFC, but on the SAFC II you do not need a wiring harness... Just extend the lines with regular wire...
__________________
PTP SSTv2, Ported Exhaust Manifold, MaxxFabb 3" O2 Housing, Needswings v5 w/cutout, Mopar Exhaust, BFMIC, Bwoody Motor/Trans Mounts, 55mm Ported Throttle Body, Injen Cold Air Intake, MSD Wires, HKS SSQ BOV, LC-1 Wideband, DTEC FCBC, Stage 2 Injectors, Walbro 255, PTP FPR Mod, AGP Hardpipes, AGP Wastegate, Bwoody Catch Can, Check Valve, Mopar STS w/boogers, Coolingmist Meth/Water Injection, Fuel Pump Re-Wire
|
