Quote: Originally Posted by
srt-tech 
Vehicle Issue Erratic idle | Inspect the wiring harness and repair as necessary;Prior to replacing parts, please review the explanation below in the recommendation field.
Recommendation Inspect the wiring harness and repair as necessary Check engine wiring harness near the crank sensor to verify if the wiring insulation on the individual wires, inside of the harness, has fused together and allowed the wires to pass current through the insulation
IM SWAPN ECU AND MAP -STAGE 2 LATER THIS WEEK, MY CAR IS DOIN IT AS SOON AS IT WARMS UP ALL SENSORS SEEM TO WORK FINE AS OF DRBIII,I"LL CO- PILOT IT IF SWAP DOESN,T WORK .ITS NOT THE TPS ON MY CAR WATCHED ON DRBIII CHECKING WIRES 2MORROW AND THE MAP READS -20 WIDEBAND @ 14.7,THIS TIP KINDA SOUNDS REASONABLE-TIMING ISSUE?
