I wanted to show everyone what one of our customers recently did with our technology. I feel honored that he chose us, but also that he took the time to make this fantastic diagram and send to us. I make this thread to show each of you what possibilities you have with our technology. In this example the customer is using the following:
1 Coolingmist Smart Injection Controller
1 Coolingmist Vari-Cool 2D model (1.06 Flash)
2 Coolingmist S-HSV valves with 500 CC nozzles
1 Coolingmist Flow Sensor
1 Tank (underhood shown, however he is using our Trunkmount tank).
The customer has chosen to inject by using a custom map of 3 inputs. Using the smart controllers 8 X 8 Grid he mapped the following to create a 0-5V output. This 0-5V output will go to Vari-Cool as 2 of the 3 inputs for injection. Our new flow sensor is integrated and if flow, water level and other inputs are not within spec the failsafe will trip. He is also activating a fuel pump at a certain overboost level and has integrated his boost controller into our system. The project is below. As well as the diagram.
I will start this thread with pictures of some of the components. The next page I will show the diagram and talk about what he did and how he integrated into his vehicle.
SMART INJECTION UNIT and Vari-Cool:
S-HSV Valve
