I honestly can't remember if there are couplers connecting the cold pipe on or if they are built onto it....Anyway....here's my story.
I have a AGP cold pipe and it took be about 30-45 minutes to get that little fucker on. An oil soaked t-shirt and two screwdriver stab wounds later, it went on.
I found that if you tighten the couplers to the intercooler and throttle body first....it's a little easier to get the pipe to slide in both at the same time...rather than going from bottom to top. (gives you more room to wiggle the pipe around)
__________________
50 Trim + Diablosport =  |
