sorry andrew your having problems with the tranny.
its frustrating belive me when i rebuilt the motor then it went boom!! 2300$ down the drain. i know how ya feel. then sell the dbb 60 trim to pay for stock internals since the rods + pistons are no good. well maybe two rods are ok,but two of them are shot. the pistons are now scrap aluminum.
bobczar hey it does not look like a real authentic hks ssqv bov. it will work ok,but the seals are poorly made and im sure wont hold up to high ammounts of boost. i bought a ebay typre "rs" look alike. lasted 3 weeks. the diaphram was shot and was leaking. found out the bov gasket had a hole worn in it.
__________________
SRT-4 is built in the US with 84% US content.
A New 06-07 Mustang is built in the US with 64% US content and does not legally qualify to use the term "Made in the USA". How's that for an import? Stock turbo/ 3'cai, 3"O2 housing, 3"DP, AGP WGA, mild port head w/3angle valve job w/crane springs retainers,2.0 cams w/fidanza gears, ED hard pipes, hks bov, ported 55mm tb. thats just the begining
