got my exhaust oil flow modifier and new valve cover in this past weekend... so far so good i had to rewire the 02 sensor and am getting a high voltage code so i probable hooked the two white wires up in reverse. Also the ED exhaust sits a little low and one tip sticks out slightly further so I am going to have to get an exhaust shop to shorten one side as well as shorten the hangers to pull it up a little.
__________________
04 Black(kinda) SRT-4
Installed: FM WGA, Modified ED dual Exhaust (black), BDJ's 3" CAI ceramic, Bwoody Checkvalve, X02 BFMIC, Cold Side Pipe with Raptor BOV, Techgauge, Upper DogBone, Oil Modifier, 18" HPD Bronze wheels, and Goldlines
Waiting go be Installed: PTP FTM, Wideband, Lower MM insert
|
