Quote: Originally Posted by
Chino7385 
Is the pump accessible or is it mouted in a hard to reach area? Im not sure what your pump looks like but on mine theres a third prong that i can switch the ground connector on that jumps the hobbs switch. Its right on the switch itself. If you dont have that the you can just jump it with a little wire. I use to do it like that untill i figured out what the other prong was.
Its in my trunk. So I just switch the ground plug from the correct spot to the unused spot on top of the pump? Not bad i guess.
I have a wire "T-ed" of the power wire on the drivers side under the carpet. I pull of the plastic piece and the 6 foot wire is right there to reach the battery. This allows me to unplug the meth line and hold it to see when the meth squirts out w/o going in the motor or on the car.
But if I had a on/off switch inside the car, turn on the car, turn on the switch and watch my A/F dip, then I would know it working! Not bad.
I had it setup like that by accident 3 years ago, I dont remember how I wired that in last time.
__________________
FS: HID Fogs Kit - 6000K & 3000K(Yellow) - PM Me
Performance Mods: AGP S3D 48lb - Returnline - Mopar Stage 2 w/o Toys - DW 650cc - TurboXS HPMBC - Maddog STS - MaxxFab 3" DP w/o Cat Magnaflow Muffler - AIS Intercooler - ED LPP - ED UPP w/ HKS BOV - Injen Intake - NGK V-Powers @ .032 - FBM Ported Intake Mani/Spacer - DCR 55mm Throttle Body - DCR Oil Mod - Devils Own MethInjection, M5 - DTEC - AEM UEGO
385HP and 385TQ