Quote: Originally Posted by
Nvbby 
So yea, i pretty sure its somewheres on here, but i'm a bit lazy to search. so i just wanted to ask. I would like to jump straight to a Stage 2 Turbo, seeing that its only 500 bux more w/o turbo toys. and i can always add that later, so heres the question. what is everything i need to change? first i'm going to get a 3"down pipe all the way back so i dont have to worry about air flow through there, but dont know what brand or which one sounds good. any tips on that would be helpful as well.
Funny....
Realistically, look at supporting mods as well and learn a little more about your systems first. Stage 2 THRIVES off of a 3 inch exhaust, so you'll need that. No a full body downpipe... Look at maxxfab for an o2 housing and a downpipe at the minimum. There's no better quality part. You don't need to worry about the intake, it will hold you fine on a stage 2. I made the noob mistake and bought a cold air when I could have better spent the 240 buckos. As stated above, look into a wideband O2 setup. Stage 2 runs very rich, so you'll want to get a Map Clamp/SAFC/DTEC/SCT as well to lean it out. See: Tuning. Also what tuning pertains to on our cars. There's a rough start mate... Do some major reading in the performance section and what's hot on the active topics. Ask serious questions and assume nothing. Nobody gets made fun of when they're serious and they've done reading. Search first... ask questions later.
