Something is not right with your engine managment. Or engine.
As others have stated it's a good place to start.
As for a larger nozzle. You are spraying into a 3 inch pipe. From what I have seen I would not go over a m5 in any piping under 3.5 inches. If you need more than a m5 can provide than add a second nozzle. Start with a m2 as the second. Keep them a min of 3 inches apart.
Also the bigger you make the hole (larger nozzle/ extra nozzle) the higher your on-set duty cycle is going to have to be.
Good Luck
|
