05-05-2008, 01:46 PM
|
#2 (permalink)
|
|
Audio, Security & Visual Electronics Moderator
Join Date: May 2005
Member Number: 28234
Location: Tempe, AZ/SC
Posts: 1,260
|
When you bridge you are using The negative from 2 channels and the positive from 2 channels. You may be switching the wiring from 2 to 4ohms therefore giving you less output. A picture of how you have it currently wired might help as well. Enter the information in the following link just to make sure you have it wired correctly. Let me know if you are still having problems.
Rockford Fosgate® - Woofer WiringWizard
*took the pic out, I'm retarded and it's a DVC sub*
__________________
2004 Black Dodge SRT4 - AGP 50 Trim .63A/R @ 21psi, Crane 12s, .020" overbore, JE Forged Pistons, Eagle Rods, HKS SSQV BOV, JMB (3" ultimate intake, Pressure Pipes, MM's), AGP FMIC, Stage 4 6-Puck CM Clutch, 3" BDJs Dump, RC 750cc's, Aeromotive FPR, -4an Teflon Fuel Line, Rewired Walboro Fuel Pump, Perrin Fuel Rail, Greddy Emanage and E-01.
Last edited by CrEaTrE : 05-05-2008 at 01:57 PM.
|
|
|
