Quote: Originally Posted by
Chino7385 
Sorry to highjack the thread. I didnt want to start a new thread with the same topic.
Yesterday a problem started with my remotes. Both the small clicker and the pager wont comunicate with the alarm. The alarm still functions just fine, i just had to manually put it in valet mode because i couldnt deactivate the alarm with the remotes. Is this something a compustar installing shop would be able to help me with? The alarm is 3 years old and was install by a shop thats 2 states away.
Any info would be much appreciated.
-Luis
Yeah they can but I am sure they'll charge you something. Try to do this.... Click your ignition on and off 5 times with in 7 seconds. Right after the last time you click it off, you should hear/see the lights flash. If you do, press one of the buttons on one of the remotes then do the same on the other remote. Each time a button is pressed on either remote the lights should flash. If it responds everything should be fine. If not you are either not it learn mode or your antenna/cable is bad.
