I will be using methanol port injection with a small 35 shot of nitrous, I'm looking at using both combined as a total power adder rather then both being independent power adders. The nitrous will be controlled by the AEM EMS and will have the Aquamist DDS3 (used for methanol injection) interfaced to the EMS.
The AEM directions for nitrous recommends the setup and use of a dry shot setup with the EMS increasing fuel delivery under nitrous activation, but I'm going to have wet shot setup as per recommendations of Jay at N2MB. Once things are setup I'm hoping to cut down on the pump fuel being delivered by the nitrous setup and use the methanol injection setup as additional fueling for the nitrous because it's high octane value.......but this is talk right now as I do not have this working.
You should be fine with methanol injection and nitrous.
|
