I got the new code from boostjunkie and will be uploading it again...lil tired and gotta get some food. I think my issues with the high idle are due to my battery voltage. When burning firmware it comes back saying 11.0 voltage.....so thats not good. When I reset the pcm and start the car up it idles completely fine. When I blip the gas the idle goes up and hangs. I let it sit for about 10 minutes idling like it should and blipped the gas....came back down as it should have. I attempted to drive and made it about halfway around the block(1/2 mile) and it started it again. So a friend is bringing over his battery charger and I am going to charge it overnight. Its a 1400 cold cranking dry cell battery so its a big battery.
__________________
Shop hours are 10am to 7pm Mon-Fri
Taking calls on Tuesdays and Thursdays
|
