could'nt be easier dude, they basically snap right into fuel rail......take neg battery cable off....locate fuel rail.....undo fuel rail cover bolts they hold both the rail and the fuel rail cover ( there long black bolts right under the black cover that says srt4 on it)...gently pull and wiggle the fuel rail untill it pops off the intake maifold.....at this point the fuel rail should be off all four injectors will be stuck to the rail......each injector has a small metal clip that holds it to the rail, undo the clips and take off each injector, install new injectors....
If you need more room to install you can take the fuel rail off the fuel line at the grey quick connect right at the end of the rail... you'll see it, its a small grey thing with two tabs you push in on and pull off the line....
Last edited by 19 psi : 04-15-2008 at 09:35 PM.
|
