Include

[ptperformance]

Here you go guys. Its all done and ready to start production. Here is the problem, there is a 3" on 3.5 U bend that we need to use to make this, these cost damn near $100 a pop, not to mention the flanges, and the other 3" 90 degree tight radius bend that we needed to use. There is close to $200 in materials alone so I can not see selling these for anything under $300 ish dollars when its all done. So, if you must have a 3" o2 housing for your Hann 20g set up we can do that for you. Let me know guys if this is going to work for you, thanks.