Quote: Originally Posted by
srt4101 
You just did massive surgery on this beast. Double check the exhaust manifold is tight and there is no leak at the gasket. Also check the wastegate, make sure it's tight. I would just recheck all the nuts and bolts at the turbo and check for the obvious leaks. As far as spool my 50 is spooling at roughly 3500 in 4th gear (20psi) so for you to only be getting it a few hundred later does not seem so bad.
20psi at 3500?
seems a lil slow...especially for 4th gear in a 50trim.
4th gear i see 10psi at 3500
seriously bro, its fuckin hurtin me.
luckily i swooped an AEM ems, so i can raise my rpm's.
im going back to daves next weekend, and might install the AEM EMS and fix an oil leak.
ill check for leaks tho i dont hear any. i will also buy a damn 120$ hallman mbc just so i know it aint the mbc.
if it just ends up being this laggy kus thats the turbo characteristics, ill prolly sell it and go smaller. fuckin gay man.
