OK don't know what is was but I loaded the AEM startup map and it stopped the clicking. So I tried to reload my map and start it again and it went away. So I guess maybe a bad connected from last. But anyways I have a new problem. First my idle is at 2500rpm. So tomorrow I'm gonna have to make me a boost leak tester. And secondly the car is still on jackstands and when I start the car and have tranny in neutral the wheels spin. I don't know if this has anything to do with the high idle but I'm gonna try and fix the idle first.
__________________
DCR: 2.6 over 40 stroker, Pro series Head w/ Crane 18, Input Shaft, Intake manifold w/ Tial BOV, CP Ignition
AGP: GT3582R turbo kit
Mopar: Sway Bars, S3R CO, Ti Strut Bars,
Rage-Tek: LCA, TOB, Triple Fuel Pumps, 1000cc Inj 3/4 fork
Autometer: WB, Boost, Oil PSI, Oil Temp, EGT, FP
ClutchMaster: Twin Disk
AEM: EMS w/ 3.5 BAR sensor
JMB: 4in Intake, Hotside Hardpipe
Boomba: All 3 MM
|
