Thanks for the reply.
I am off of computer controlled boost and have been for over a year. The "wall" that I am hitting is not fuel cut. I hear compressor surge until the RPMs come up enough then it steadies out at 20 lbs.
I have a Greddy profec 2 EBC that is not hooked up right now. I am trying to get the WGA set right to get rid of the compressor surge before I hook up the EBC to fine tune things. With the EBC on I had to spike 26 lbs just so I wouldn't hit compressor surge. I don't have the fuel for 26lbs yet.
When I had the 16g and the 8lb spring wga from Hahn I didn't have any compressor surge issues (if I didn't cause them by stomping it at low RPMs). Now with this new WGA it has a 15lb spring in it but I am sure it is a modified WGA. The diaphram in the WGA might be leaking. I need to hook an air compressor up and see what is going on.
I think I have Bnice's old kit. Natsu had it, sold it, and I bought it off the guy who bought it.
__________________
Hahn 20g (was 16g) w/ DW 650s  , W/M, Custom 3" O2 Housing and some other goodies.
No returnline! |
