For Kicks and Giggles, here are pics of my previous CF trunk lid. (Also posted in our local Canadian forum)
Brand X CF trunk previous pics.
Look how high the trunk lid sits, unless you machine out the trunk latch holes. (I remember being told that no modification would be necessary. I had to drill out the holes in my trunk latch by some 3/4", lowering the trunk latch to get my previous CF trunk to fit.
Right Side
Left Side (This picture also shows how far forward the vertical side of the trunk sat in relation to the taillight and quarter panel)
Nice fitment, huh? (Oh but this is the installers fault, isn't it always, says Brand X's tech support)
Look at the nice fender gap.
(This trunk along with all the ones we sold had finger gaps on the left side, almost touching on the right side)
(Brand "X" tech support told me it's all in the adjustment and that would fix the problem, not so. Measuring from the outside edge of the hinge pockets to the side edges of the trunk lid, one side was over 1/4" shorter than the other. Can you guess which side was shorter. 
)
I am so happy to get remove this POS off my car. It's been a long time coming to by an "A" grade product to replace that previous "F" grade product.
Next...............Brand "X" CF hood. It's going bye, bye very soon.
