If you were closer to the border, you could drive and pick it up, better yet, I could help you install it too.
I posted pics in our local Canadian Forums, but I am posting in our own Vendor forums too.
First of, let me say that this was a lot easier install than my previous Brand X trunk lid. I actually had to raise my trunk latch back to the stock location because, using the previous setting, it wouldn't catch the lock. Just goes to show you, a good product does replace OEM correctly, without any modification nor does it need a "professional" installer like it was always suggested by Brand X's tech support.
One thing, if any aftermarket CF manufacturer claims that fiberglass hinge pockets are better than metal ones, they are full of shite.
_!_
Now for the pics.
Back End Shot
Check out the even gaps (Left Side)
(Right Side)
Look how well the trunk lid flows into the rear quarters, nice and level. (Check out the panel gaps, pretty darn good compared to Brand X)
Oh, look how nicely flush the vertical side of the trunk lid is to the taillight and rear quarter. (Brand X was forward of the quarter panel by at least 1/4 inch)
And finally, the third brake light fits snugly in the opening. (Unlike Brand X which looked like a child cut the hole, gaps all around leaked water into the trunk)
