Include

[FraziersSRT]

Hey guys whats going on?Well a little after installing my E1 turbo I found a great deal on a big wheel S3 setup.Just happened to be the 49lb wheel PTP offers,with a FBM internally gated S3 manifold.Once I received all the parts,I knew I wanted to convert the manifold to an externally gated unit,so off to PT Performance it went! So now the manifold is a FBM S3 Mammoth Manifold but PT Performance performed the External gate conversion.Im running the unit with a TiAl 38mm WGA,no manual boost controller right now as im awaiting my next install (AEM EMS) then I should be making some power.Just wanted to take some pictures and show everyone on the forum because I couldnt find any pics of anyones Big wheel'd,Externally Gated S3 Setups!



In this next picture,you can see how close the WGA is to the back side of the valve cover.I had to shave the bolt down on the WGA for the boost source with a bench grinder in order for the WGA to bolt down correctly onto the manifold.



Note to self : There is no dump tube right now,that will be tomarrow.





Not bad eh?Discuss!