so some body help me out here i'm trying to get the most out of this kit before i scrap it and start over. last time i dyno'd i got 330whp at 18psi. i don't know if that was b/c of all the boost leaks, water damage to the portfueler, bad map clamp, or my stock ecu.
so after all that said and fixed here is my setup:
Hahn s20g
Hahn portfueler
dasmopar map clamp
stage 1 ecu
DCR oil pump, crank scraper, bafflle, lg oil pickup,lg oil filter and oil flow modifier.
plus the other supporting mods, solid mm, greddy type s bov, injen cai, custom 3" exhaust, aem afr, E-01 ebc,not sure on wga spring purchased kit used, walbro255. snow stage 2(not installed broke regulator on pump)
if someone has experience with or has a similar setup i could use some direction. i would like to get 400-425 on pump if that is possible, but that is something i am not sure about
|
